PAO Gear Oils
DESCRIPTION
PAO 320 Synthetic is an Industrial Gear Oil with an ISO 320 viscosity grade. PAO 320 Synthetic is blended with the highest quality polyalphaolefin (PAO) synthetic base oils and additives to provide extreme pressure protection, resistance to foam and excellent rust, corrosion and oxidation protection. Non-corrosive to brass, bronze, steel and other copper alloys.
PAO 460 Synthetic is an Industrial Gear Oil with an ISO 460 viscosity grade. PAO 460 Synthetic is blended with the highest quality polyalphaolefin (PAO) synthetic base oils and additives to provide extreme pressure protection, resistance to foam and excellent rust, corrosion and oxidation protection. Non-corrosive to brass, bronze, steel and other copper alloys.
TYPICAL PROPERTIES
ISO Viscosity Grade
PAO 460 SYNTHETIC
ISO 460
PAO 320 SYNTHETIC
ISO 320
Appearance
Kinematic Viscosity @ 40°C, ASTM D445
Liquid, transparent
460 cSt
Liquid, transparent
320 cSt
Kinematic Viscosity @ 100°C ASTM D445
54.1 cSt
40.6 cSt
Viscosity Index, ASTM D2270
184
181
Flash Point, ASTM D92
Copper Strip Corrosion ASTM D130
234°C
1b
233°C
1b
Pour Point
-54°C
-54°C
Foam Tendency/Stability ASTM D892
Total Acid Number, ASTM D664
0
0.9
0
0.9
SIZES AVAILABLE
-
Case of 4 x 1 gallon jugs
-
5 gallon pails
-
55 gallon drums
-
330 gallon totes
APPLICATION
PAO synthetic industrial gear oils are engineered to deliver exceptional performance, providing optimal equipment protection and extended oil life, even in extreme conditions. These oils are specifically formulated to resist micropitting in modern, case-hardened gears and are suitable for use in both high- and low-temperature environments. PAO synthetic gear oils also allow for chanced efficiency in industrial gear oil systems through improved low temperature performance and reduced friction compared to traditional mineral oil-based products.